CBRHS - KODAK FLEXICOLOR STABILIZER III & REPLENISHER/C-41, 873 5599
- MSDS: CBRHS
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: KODAK FLEXICOLOR STABILIZER III & REPLENISHER/C-41, 873 5599
- National Stock Number: 6750-00D004898
Product Identification
Product ID:KODAK FLEXICOLOR STABILIZER III & REPLENISHER/C-41, 873 5599
MSDS Date:11/01/1995
FSC:6750
NIIN:00D004898
Kit Part:Y
MSDS Number: CBRHS
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 800- 242-2424
Cage: 19139
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 95-100%
FORMALDEHYDE (SARA 302/313) (CERCLA)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: <1%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM, A2; 9596
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
METHYL ALCOHOL (METHANOL) (SARA 313) (CERCLA)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: <1%
OSHA PEL S, 200 PPM
ACGIH TLV: S,200PPM/250STEL; 96
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ANIONIC SURFACTANT, NEW JERSEY TRADE SECRET, REGISTRATION
Fraction By Weight: <1%
NONIONIC SURFACTANTS
Fraction By Weight: <10.0%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION-FORMALDEHYDE PRODUCES MILD
SENSORY IRRITATION OF THE EYES, NOSE & THROAT AT 2-5 PPM.
EYES-CAUSES IRRITATION. SKIN-CAUSES IRRITATION. INGESTION-EXPECTED
TO BE A LOW INGESTION HAZARD.
Explanation of Carcinogenicity:CONTAINS F [50-00-0] WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:EYES-VAPOR CAUSES EYE IRRITATION AND TEARING.
SKIN-MAY CAUSE ALLERGIC SKIN REACTION.
Medical Cond Aggravated by Exposure:EXPOSURE TO FORMALDEHYDE MAY CAUSE
RESPIRATORY SENSITIZATION IN SOME INDIVIDUALS OR AGGRAVATE
PRE-EXISTING ASTHMATIC CONDITIONS.
First Aid
First Aid:INHALATION-MOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. GET
MEDICAL ATTENTION IF SYMPTOMS OCCUR. EYES-IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR 15 MIN. GET MEDICAL ATTENTION. SKIN-IMMEDIATELY
FLUSH WITH PLENTY OF WATER FOR 15 MIN. WHILE REMOVING CONTAMINATED
CLOTHES/SHOES. GET MEDICAL ATTENTION. INGESTION-DRINK 1-2 GLASSES
OF WATER. SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE APPROPIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
ELIMINATE ALL IGNITION SOURCES. ABSORB SPILL WITH VERMICULITE OR
OTHER INERT MATERIAL, THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE.
CLEAN SURFACE THOROUGHL Y TO REMOVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED.
Other Precautions:AVOID BREATHING VAPOR. AVOID CONTACT WITH EYES, SKIN
AND CLOTHING. USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER
HANDLING.
Exposure Controls
Respiratory Protection:IF FORMALDEHYDE IS EMITTED AT LEVELS REQUIRING
RESPIRATORY PROTECTION, THE FOLLOWING RESPIRATOR TYPE SHOULD BE
WORN: FULL FACEPIECE WITH CARTRIDGES OR CANISTERS SPECIFICALLY
APPROVED BY NIOSH FOR PROT ECTION AGANIST FORMALDEHYDE.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:NEOPRENE RUBBER, NITRILE RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:CHEMICAL PROTECTIVE CLOTHING MADE OF
MATERIAL IMPERVIOUS TO FORMALDEHYDE AND THE USE OF OTHER PERSONAL
PROTECTIVE EQUIP.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WARNING! CONTAINS FORMALDEHYDE. POSSIBLE CANCER HAZARD.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6
Spec Gravity:1.001
pH:9.0
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, COLORLESS, SLIGHT FORMALDEHYDE ODOR.
Percent Volatiles by Volume:95-100
Stability
Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS AND CONTAMINANTS WITH WHICH THE MATERIAL MAY
REASONABLY COME INTO CONTACT.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE AMOUNTS
OF WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.